|
|
Netcomm NB11W
The Netcomm NB11W an integrated modem router that supports VDSL2, ADSL2+ and Wireless LAN. Operating over VDSL2 the NB11W allows for blistering speeds. The NB11W is available only with an Adam VDSL2 service.
Features
- VDSL2/ADSL2+ Modem.
- 4-port 10/100 Mbps Ethernet Router.
- 802.11g Wireless Access Point.
- Built-In Firewall.
- DHCP Server.
- DoS Attack Protection.
- Web-based Configuration.
The modem has a series of lights on the front to indicate the status of the unit at any given time.
| POWER | On | The modem is on and getting power. |
| Off | The modem is off or not getting power. | |
| LAN 4 - LAN 1 | On | The Ethernet connection is on this port is active. |
| Flashing | Data is being transferred on this port. | |
| Off | There is no Ethernet connection on this port. | |
| WIRELESS | On | Modem is broadcasting wireless LAN. |
| Flashing | Data is being transmitted over the wireless LAN. | |
| Off | Modem is not broadcasting wireless. | |
| ADSL | On | ADSL Sync Success. |
| Flashing | ADSL Training. | |
| Off | No ADSL signal detected. | |
| VDSL | On | VDSL Sync Success. |
| Flashing | VDSL Training. | |
| Off | No VDSL signal detected. | |
| ALARM | Off | Normal operating status. |
| Red | The VDSL or ADSL link has terminated. |
Specifications
| Dimensions | Height: 44 mm, Width: 200 mm, Depth: 137 mm |
| Power | 15 VDC, 1.6 A |
| Ethernet | 4-port 10/100 Mbps |
| Wireless LAN | 802.11g |
| Wireless Security | WEP, 802.1X, WPA-PSK, WPA |
Guides
The guides in this section will walk you through setting up your equipment. Tick the boxes for all of the guides you wish to view.Firmware
The latest firmware can be downloaded from the Netcomm firmware page, please ensure you read the supplied information.Further Information
- For Netcomm product information, support and updates, see the Netcomm website.
- Back to Hardware Profiles
Information
FAQs
Dial Up
Tools
Support Guides
Technical
